The influence of the mercury and thallium atoms in organomercury and organothallium nitroxyl radicals on their reactivity

An increase is found in the reactivity of organomercury and organothallium nitroxyl mono- and biradicals of the imidazoline type in comparison with the analogous compounds without organometallic fragments. This is explained by the formation of coordination bonds NHg, NTl, and NOHg.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 224–226, January, 1993.     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

Rh(III), Pd(II), Pt(IV) and Au(III) complexes of 2-thiopyrimidine derivatives

Some news thiopyrimidine derivatives and complexes [4-amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidine (TANH), its 2-methylthio derivative (MTH), the ammonium salt ofTANH (sTANH) and six new complexes of formulas: Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃ Pd(TANH)₂Cl₂ and Au(TAN ^–)Cl] have been synthesized and characterized by elemental analysis, IR and¹H-NMR spectroscopy techniques. The thermal behaviour of all compounds has also been studied.

---

Rh(III), Pd(II), Pt(IV) und Au(III) Komplexe von 2-Thiopyrimidin Derivaten

Zusammenfassung Es wurden einige neue Thiopyrimidinderivate und deren Komplexe synthetisiert und mittels Elementaranalyse, IR und¹H-NMR charakterisiert: 4-Amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidin (TANH), dessen 2-Methylthio-Derivat (MTH), das Ammoniumsalz vonTANH (sTANH) und sechs neue Komplexe der Formeln Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃, Pd(TANH)₂Cl₂ und Au(TAN ^–)Cl. Das thermische Verhalten der Verbindungen wurde ebenfalls untersucht.

     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Determination of daidzein and genistein in soybean foods by automated on-line in-tube solid-phase microextraction coupled to high-performance liquid chromatography

An automated on-line method for the determination of the isoflavones, daidzein and genistein, was developed using in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). In-tube SPME is a new extraction technique for organic compounds in aqueous samples, in which analytes are extracted from the sample directly into an open tubular capillary by repeated draw/eject cycles of sample solution. Daidzein, genistein and their glucosides tested in this study were clearly separated within 8 min by HPLC using an XDB-C8 column with diode array detection. In order to optimize the extraction of these compounds, several in-tube SPME parameters were examined. The glucosides daidzin and genistin were analyzed as aglycones after hydrolysis because the glucosides were not concentrated by in-tube SPME. The optimum extraction conditions for daidzein and genistein were obtained with 20 draw/eject cycles of 40 microl of sample using a Supel-Q porous layer open tubular capillary column. The extracted compounds were easily desorbed from the capillary by mobile phase flow, and carryover was not observed. Using the in-tube SPME-HPLC method, the calibration curves of these compounds were linear in the range 5-200 ng/ml, with a correlation coefficient above 0.9999 (n = 18), and the detection limits (S/N = 3) were 0.4-0.5 ng/ml. This method was successfully applied to the analysis of soybean foods without interference peaks. The recoveries of aglycones and glucosides spiked into food samples were above 97%.     

Asymmetric Strecker synthesis by addition of trimethylsilyl cyanide to aldehyde SAMP-hydrazones

The asymmetric 1,2-addition of trimethylsilyl cyanide to aldehyde SAMP-hydrazones in the presence of titanium tetrachloride and diethylether in dichloromethane at −100°C up to room temperature, removal of the chiral auxiliary and acid hydrolysis affords α-amino acids in high enantiomeric excesses (ee=94-97%).     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Nitro derivatives of cyclic sulfoximides of the 1,2-benzoisothiazole series

Nitro derivatives of 1-R-1,2-benzoisothiazol-3-one 1-oxide were synthesized by the reactions of 2-alkyl(phenyl)thio-4-nitro- and 4,6-dinitro-2-(phenylthio)benzamides with chlorine in 60% acetic acid. Analogous reactions of 2-(n-butylthio)-4-nitro- and 2-(tert-butylthio)-4-nitrobenzamides with chlorine afforded 2-butyl- and 2-H-1,2-benzoisothiazol-3-one 1-oxides, respectively. The proposed reaction mechanism includes the formation and subsequent transformations of S-alkyl-S-aryl- and S,S-diarylchlorosulfonium chlorides.     

Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C.

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C., has been developed. The synthesis is based on cross-coupling of 8-iodooct-2E-en-I-ol THP ether with dec-5Z-enyl bromide catalyzed by CuBr. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1529–1531, August, 1997.